The problem - Windows 8 clients can't associate to CUWN
Windows 8 wireless clients can encounter a problem when trying to associate to the Cisco Unified Wireless Network. If the client is using WPA or WPA2 key management with AES encryption, then the pairwise key exchange may fail. With "debug client" in effect on the Wireless LAN Controller, a message similar to the following is seen:
*dot1xMsgTask: Jun 12 20:23:37.471: 00:11:22:33:44:55 Retransmit failure for
EAPOL-Key M1 to mobile 00:11:22:33:44:55, retransmit count 5, mscb deauth count 0
Hello everyone, so this mornring when i came in, about half of my APs were not connected to my WLC. I went into the logs, and this is what is there:*spamApTask4: Dec 03 14:48:38.267: %CAPWAP-3-AP_DB_ALLOC: [SA]capwap_ac_db.c:151 The system is u...
Hello Team, I configured WLC, Prime Infrastructure and CMX-10 and they are all linked together. However, clients association is not showing on the MSE-CMX10 dashboard.How do I fix the issue by a way of configuration.Help will be much appreciate...
I have a WLC 3504 that has interface assigned to it named Cisco 1 with SSID also assigned as Cisco 1. When i connect a client i receieve an external ISP portal for authentication. This SSID with interface works. Im required to create a ne...