cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Wireless LAN Controller (WLC) Password Recovery Video

27065
Views
5
Helpful
12
Comments
Comments
yusuf.ujjainwala
Beginner

Its really a nice and helpful video. I wanted to know does the proceedure remain the same for the WiSM installed in the 6500 also.

Hi Yusuf,

Thanks a lot for the comments. The procedure to recover password on WiSM is documented at http://www.cisco.com/en/US/products/ps6308/products_password_recovery09186a008071faa7.shtml

Hope it helps.

george.carlisle
Beginner

Do you know what the default login is for the 3700 ISE-NAM? It says admin and password default but I can't can't get on with this.

george.carlisle
Beginner

3800 sorry

bdarcyevans
Community Member

Can anyone confirm if this process leaves all other config (and other user accounts) intact?

Vinay Sharma
Rising star

You can also view the same video from Rajesh on CSC youtube channel as well:

https://www.youtube.com/watch?v=cMeQTBIBlNc

farhanegal77
Beginner

Help!!

I need to recovery 5508 Wireless controller password. Can someone here from Cisco community can help me by sending me the steps to recovery to recover password and username PLEASE.

 

 

Thank you

Scott Fella
Hall of Fame Master

You would have to factory default the unit. If you have smnp configured and prime infrastructure, you could create a new admin user.  Other than that, there is no password recovery.

https://supportforums.cisco.com/document/26646/how-recover-password-cisco-wireless-lan-controller

-Scott

farhanegal77
Beginner

This video was very helpful. thank you for the upload! I was able to restore my WLC controller password.

sureka111
Beginner

After the reboot when i type Restore-Password hit enter, my 8.0.132.0 WLC just goes to password as next prompt.  Not asked username;

Any other way password recovery for this model ?

Pls advice

farhanegal77
Beginner

Enter the new password you created after you reboot the device.

I followed the attached video and it worked for my 5508 WLC.  Look like you are using updated IOS for your WLC.

what is the model number?

farhanegal77
Beginner

https://www.youtube.com/watch?v=cMeQTBIBlNc

Content for Community-Ad