Webex Recording (2009) explaining the tool, how to use it, and some day to day field tips
RF Health Metric
New in Version 3.3.0
New experimental troubleshooting tool: “RF Health” This is a modification of the RF index to change the format to a 0 to 100 metric, the higher the better, for a easier to use experience it should work properly to isolate what areas/Aps of the deployment are having a bad RF state, affecting clients.
RF Health will try to calculate different metrics applicable to RF quality on the AP, and convert to a single 100 based scale. It takes into consideration things like low SNR client count, co-channel interference, channel utilization for nearby Aps, noise, etc. It currently supports 20/40 channel width, and handles properly bonding scenarios. You can open “RF problem finder” to get details on the metric per type, per AP, for in depth analysis Please provide your feedback on the metric, for additional improvements, change on default values, etc.
Booted up this AC240 and added a guest network, with captive network assistant turned on, and captive portal set to "internal", and access type set to "local user account". I went into advanced settings and added a local user. Great. Now, when I connect t...
I have recently deployed a 2 virtual WLC c9800 on ESXi working as HA , v 17.4.1 . Kind of strange after while , i can see only two tabs in the main window ( Dashboard and Monitoring ) , image attached. is this normal ?
Hi Doing site survey or wireless design with Ekahau(latested ver) need to import map first. However, after the map was imported, I cannot get the below windows box. In another word, i only can import the map, but no left section of the below picture. Anyo...
Hai, I have Cisco 9800 WLC, AP 1815i and 1562i.1815i APs are joined and working fine.But 1562i Aps are not joining to the controller. Kindly share your information to fix this issue. Below is the logs from 1562i AP:[*03/06/2021 10:39:24.310...