This event was scheduled for September 23rd, but it has been moved to November 10 due to complex and unexpected circumstances. We apologize for all the issues this may cause.
Community Live- All Things LTE…4G, 5G and Whatever’s Next
(Live event - formerly known as Webcast- Tuesday 10 November, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event will have place on Tuesday 10h, November 2020 at 10hrs PDT
Register today for this live Cisco Community event.
This session will spend time going over the current LTE market space from the consumption side of the equation. We will cover Cisco’s current 4G LTE client offerings from the Enterprise BU as well has discuss general plans for moving into the 5G market space. As a prelude to that we will cover some differentiating factors of the 5G and WiFI6 use cases.
Fundamentals of 4G and 5G technologies
5G versus WiFi6
Current and future LTE hardware offerings from Enterprise BU
David Roten is a Technical Marketing engineer with Cisco’s Enterprise Routing BU team. For the past 7 years, David has been in his current TME role with the Enterprise BU. During this time he has spoken at several CiscoLive events along with training and customer events events globally. Prior to that, he spent a number of years working as a dev-test engineer covering the SIP-600, SIP-400, and SIP-200 linecards on the 7600 platform.
Hi to all I just want to connect the AIR-AP1562I-E-K9 to my C9800 controller. The Access Point comes in bridge mode but I need the AP in local or flex connect modeI do not want to change the mode on the cli because I have many of those.&nb...
We have three 1602 APs that, two of which were used at another site and cabled it to one of our production switches at a new site. The two re-used AP's IP was statically assigned via our WLC and worked successfully. We moved the APs to a new site, th...
Hello, Please advice. I am deploying N+1 HA with 5520 WLC. configuration is done in local mode ( Not flexconnect).When the shuting down the Primary WLC, wireless client are not able to get an ip address. Do I need to switch my configuration...
At my company we are currently using a Cisco WLC 5508 to manage our wireless network across 2 dozen+ office locations across the US and Canada.We're starting to run up against the license limit of WAP's on the current controller. We're in the process of a...