This topic is a chance to discuss more about how to deploy a successful and reliable wireless office. Learn more about the good, bad, ugly and hurdles that is needed to overcome for a successful and reliable process. Ask about methods, components, products and best practices to implement an all-wireless office (AWO), which is considered the next evolution of true Wi-Fi mobility in the enterprise.enterprise.
To participate in this event, please use the button to ask your questions
Ask questions from Tuesday, February 14th to February 24th, 2017
George Stefanickis a Wireless Architect employed by a large healthcare system in the Texas Medical Center. His Wi-Fi engineering experience spans nearly two decades and in that time he has provided consulting to many Fortune 500 companies in industries such as healthcare, mining, and hospitality. He maintains a popular Wi-Fi engineering community, the blog MY80211.com and he holds many vendor and vendor neutral certifications.
Also, he has been Technical Editor for two books related to Wireless Network technology: ”CCNA Wireless Study Guide” by Todd Lammle and ”Designing and Deploying 802.11 Networks: A Practical Guide to Implementing 802.11n and 802.11ac Wireless Networks for Enterprise-Based Applications” by Jim Geier .
As a member of the Cisco Support Community, George has been awarded with a Cisco Designated VIPstatus, a recognition that Cisco bestows upon the most valuable and influential members of their official technical support community.
George might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Contact CenterCommunity
I have a WLC 3504 at a central location and six sites that use it, including the site containing the controller. The controller has an Internet breakout on port 2 and LAN access on port 1. I am looking at implementing Flexconnect and have been through the...
Facing this issue, few APs were not working so rebooted the WLC, after reboot no APs were showing, set the Controller to factory defaults, configured as per the cisco guide but no hopepresent situation:WLC 4404, APs:LAP1242AG-E-k9Acess Points are on ...
HI Everyone, I looked at the interface details and noticed that all dynamic-interfaces have the same MAC address. And it is basically the same as the MAC address of the management interface. My WLC is 5508, and I want to know how the Cisco WLC assign...
We are implementing a VLAN in a confined environment which combines both wired and wireless connections. We currently have multiple Full HD (1920x1200) video cameras, each streaming >3.3Gbps, so we are using 10Gig switch over RJ45. The video is multica...