This topic is a chance to discuss more about how to deploy a successful and reliable wireless office. Learn more about the good, bad, ugly and hurdles that is needed to overcome for a successful and reliable process. Ask about methods, components, products and best practices to implement an all-wireless office (AWO), which is considered the next evolution of true Wi-Fi mobility in the enterprise.enterprise.
To participate in this event, please use the button to ask your questions
Ask questions from Tuesday, February 14th to February 24th, 2017
George Stefanickis a Wireless Architect employed by a large healthcare system in the Texas Medical Center. His Wi-Fi engineering experience spans nearly two decades and in that time he has provided consulting to many Fortune 500 companies in industries such as healthcare, mining, and hospitality. He maintains a popular Wi-Fi engineering community, the blog MY80211.com and he holds many vendor and vendor neutral certifications.
Also, he has been Technical Editor for two books related to Wireless Network technology: ”CCNA Wireless Study Guide” by Todd Lammle and ”Designing and Deploying 802.11 Networks: A Practical Guide to Implementing 802.11n and 802.11ac Wireless Networks for Enterprise-Based Applications” by Jim Geier .
As a member of the Cisco Support Community, George has been awarded with a Cisco Designated VIPstatus, a recognition that Cisco bestows upon the most valuable and influential members of their official technical support community.
George might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Contact CenterCommunity
Hi All, A quick question: We have 2 WLCs in HA SSO.On Primary, LAG is configured and all the ports are being used.On Secondary WLC, only 1 port is being used.We would like to use all the ports on the Secondary WLC, what's the best way to go about it?...
Hello. Have IW3702-2E with x4 AIR-ANT2568VG-N 2.5/5.0Ghz 6/8 dBi Omni antennas.AP is in autonomous mode ap3g2-k9w7-tar.153-3.JI4.tar. I have run several copy test`s;2.4ghz I can connect 144Mbit only, cause there is only 20Mhz mode avai...
Hello everybody,I have an issue where the captive portale won"t work properly, the problem is that I have control over the WLC only and not adipsys platform I think I did what should be done in the WLC following the official guide provided by adipsys...
I am a student at Pioneer Technology Center, Ponca City, Oklahoma. We have a Cisco 1950 Series wireless router that we wish to configure as a wireless hotspot. I am interested in how the router manages wireless connections and I would like to see a diagra...
Hello All, Having a very difficult time getting my 1702i AP to join WLC 2504. This is working fine when direct connected to PoE port on device, but when I attempt to connect to edge switchport (configured for same VLAN as AP-manager) the connec...