Community Live- Understanding How Multicast Works with Cisco Wireless LAN Controllers
(Live event - formerly known as Webcast- Tuesday November 19, 2019 at 9 am Pacific/ 12 pm Eastern / 6 pm Paris)
This event had place on Tuesday 19th, November 2019 at 9hrs PDT
This session provides the foundation to understand how multicast works when using Cisco Wireless LAN Controllers (WLCs). In addition, experts covers the best practices to identify and troubleshoot common issues when multicast is not working properly on Cisco Wireless LAN Networks, from the clear symptoms and common scenarios to their unique challenges and the best practices to mitigate them. The event includes a live demonstration that covers key concepts and best practices.
Internet Group Management Protocol (IGMP) vs. Protocol Independent Multicast (PIM)
Overview of PIM modes
Multicast on WLCs
Estefania Pacheco is a Technical Consulting Engineer on the Wireless team at the Customer Experience (CX) Center. She provides top-level technical support for worldwide customers using Cisco wireless products. Previously she worked as a Network Engineer with Cisco Advanced Services, solving customer challenges, compatibility issues, and reviewing network designs. Estefania holds a bachelor’s degree in Telecommunications Engineering from the Universidad Nacional Autonoma de Mexico (UNAM). She holds a CCNP R&S certification.
Jhosbell Verdesca currently works as a Customer Success Specialist focused on Enterprise Networks, Cisco DNA Center, and SD-Access. Before his current position, he worked as a Cisco Support Enginner for the Wireless Team at Cisco’s Technical Assistance Center (TAC) in Mexico for three years. Prior to joining Cisco, he worked for three years with a Cisco Gold Partner in Venezuela, implemenenting and supporing solutions in the Routing, Switching, and Security areas. Jhosbell holds a bachelor’s degree in Telecommunications Engineering from the Universidad Catolica Andres Bello (UCAB) in Caracas, Venezuela. He holds two CCIE certifications, one in Wireless and one in Routing & Switching (#58023).
i am using Aironet 4800 with Huawei PoE+ switch , 5Ghz Radio disabled because not enough PoE power. switch providing 30w and device requested 13.4 only. Mobility express configured to use both 2.4Ghz and 5Ghz radio. [*12/08/2019...
I have a WLC 3504 at a central location and six sites that use it, including the site containing the controller. The controller has an Internet breakout on port 2 and LAN access on port 1. I am looking at implementing Flexconnect and have been through the...
Facing this issue, few APs were not working so rebooted the WLC, after reboot no APs were showing, set the Controller to factory defaults, configured as per the cisco guide but no hopepresent situation:WLC 4404, APs:LAP1242AG-E-k9Acess Points are on ...
HI Everyone, I looked at the interface details and noticed that all dynamic-interfaces have the same MAC address. And it is basically the same as the MAC address of the management interface. My WLC is 5508, and I want to know how the Cisco WLC assign...