cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Wireless AP - AIR-CAP1702I-A-K9

711
Views
0
Helpful
1
Comments
Beginner
Ask Me Anything (Formerly known as Ask the Expert)
thru

Trying every method to convert a AIR-CAP1702I-A-K9 AP from Lightweight to Autonomous and am having no success whatsoever.  I connect the Ethernet cable to the PoE port on the back of the AP and straight to my laptop.  I then configure the Laptop with the IP address 10.0.0.2.  I then hold the mode button down before plugging in the power and release my finger from the button after the message to do so appears on the screen.  This is suppose to send a broadcast from the AP (10.0.0.1) to the tftp server with the Autonomous code ap3g2-k9w7-tar.153-3.JAB.tar.  I was told to append the "default" to the file name as ap3g2-k9w7-tar.default ... I did this, yet no luck.  I am out of options.  I even tried the other method of doing the following:-

 

debug capwap console cli

conf t

int BVI 1

ip address <IP ADDRESS> < MASK>

archive download-sw /force-reload /overwrite tftp://10.0.0.2/ap3g2-k9w7-tar.153-3.JAB.tar

 

Unfortunately, still nothing .... any ideas please

1 Comment
Hall of Fame Community Legend

@RaymondSmith3605 wrote:

archive download-sw /force-reload /overwrite tftp://10.0.0.2/ap3g2-k9w7-tar.153-3.JAB.tar


What happens when doing this?  What error messages? 

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards
This widget could not be displayed.