Introduction
How to Configure HWIC-AP with a Wireless Compatible Router.
Cisco HWIC Access Point Interface Card
Converged IP Communications with Wireless IP Phones
Resolution
The Cisco (High-speed WAN interface cards) HWIC-AP 802.11G and HWIC-AP 802.11A/B/G are Wireless LAN interface cards in the High-Speed WAN Interface Card (HWIC) form factor. These cards provide integrated Cisco Access Point (AP) functionality in the Cisco 1800 (Modular), Cisco 2800, and Cisco 3800 Integrated Services Routers.
The HWIC-AP runs Cisco IOS Software, and provides high-speed connections between individual laptops, desktops, and servers. The features of HWIC-AP include:
- Virtual LAN (VLAN) support
- Enhanced wireless security
Comprehensive wireless management capabilities
Single-Mode Access Point HWIC Front Panel
1 | Mounting screws | 3 | OK LED for the 802.11b/g radio |
2 | RP-TNC connectors | 4 | DATA LED for the radio |
Dual-Mode Access Point HWIC Front Panel
1 | Mounting screws | 4 | OK LED for the 802.11b/g radio |
2 | RP-TNC connectors | 5 | DATA LED for the 802.11a radio |
3 | OK LED for the 802.11a radio | 6 | DATA LED for the 802.11b/g radio |
Problem Type
Configure / Configuration issues
Products
- Access point
- Wireless Integrated Services Routers (Wireless ISR)
Reference
- How to install the HWIC-AP card on a modular router- Access Point High-Speed WAN Interface Cards to a Network.
- How to configure the HWIC-AP as a Wireless AP- Cisco Wireless ISR and HWIC Access Point Configuration Guide.
- Features and applications that the HWIC-AP supports - Cisco HWIC-AP WLAN Module for Cisco 1800 (Modular), 2800 and 3800.