cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
10104
Views
20
Helpful
3
Comments
Vengatesa Prasath
Cisco Employee
Cisco Employee

Transferring Crash file from standby:

Login to the Active WLC in HA.

 

From CLI:

 

(Cisco Controller) >transfer upload datatype crash

(Cisco Controller) >transfer upload filename <Desired filename>

(Cisco Controller) >transfer upload mode tftp

(Cisco Controller) >transfer upload serverip <ip-of-tftp-server>

(Cisco Controller) >transfer upload peer-start

Mode............................................. TFTP

TFTP Server IP................................... Xx.Xx.Xx.Xx

TFTP Path........................................ ./

TFTP Filename.................................... <Desired filename>

Data Type........................................ Crash File

 

Are you sure you want to start upload from standby? (y/N) y

Standby - TFTP Crash File transfer starting.

Standby - File transfer operation completed successfully.

 

From Gui:

Navigate to Commands > Redundancy > Upload Peer 

GUI-TFTP1.jpg 

Similarly you can transfer configuration & coredump from standby WLC.

Comments
artsunixlabs
Level 1
Level 1

IPv6 - Upgrading CISCO 871W Wireless Access Router 

cmendoza
Level 1
Level 1

Tengo 5 equipos Air-wlc2112-k9 con 15 User access licencias , pregunta urgente necesito tener un solo  equipo con 50 licencias , podría trasladar las licencias de estos 4 equipos en uno solo y tener así las 50 licencias , espero pronta respuesta gracias , y de poder como seria el proceso de trasferencia interna de licencias al equipo final que tendrá mis 50 usuarios con licencias gracias 

jtier
Level 1
Level 1

Thank you for posting this. Very helpful.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: