Buy or Renew
Buy or Renew
Cisco Virtual Engineer generative AI bot now active in Wireless Discussion Forum. Learn more.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Create a new article
2037
Views
10
Helpful
2
Comments

Location Appliance 2710 stops tracking Wireless Client when WLC code is 7.0

Serge Yasmine
Cisco Employee
Cisco Employee

‎10-20-2010 01:24 AM - edited ‎11-18-2020 02:51 AM

This is a heads up about the following bug on Location Appliance Code pre 6.0.103.0: CSCth48443

If you are doing location tracking with a 2710 and you upgrade your WLC from 6.0.x to 7.0.x release, you will notice that there is no 7.0 code for the 2710. After the WLC code upgrade, tracking for wireless clients will stop.

The issue is fixed via bug CSCth48443 in code 6.0.103.0 or later on the 2710.

While waiting for 6.0.103.0 or later to be released on Cisco.com download section, a TAC case needs to be opened to get the special fixed code on the 2710.

Comments
Chuck Dillon
Level 1
Level 1
‎01-13-2011 07:46 AM

Does the 2710 support 3500 series access points with this new 6.0.103.0 release?  I know in previous releases it does not.

thanks

Serge Yasmine
Cisco Employee
Cisco Employee
‎01-14-2011 12:40 AM

Hi Chuck, no the 2710 doesn't support the new 35xx Access Points and there is no plan to do so. We have opened a documentation bug for it: CSCtl55138

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents