(Live event - formerly known as Webcast- Tuesday 10 November, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Tuesday 10h, November 2020 at 10hrs PDT
This session spend time going over the current LTE market space from the consumption side of the equation. It covers Cisco’s current 4G LTE client offerings from the Enterprise BU as well as discuss general plans for moving into the 5G market space. As a prelude to that it covers some differentiating factors of the 5G and WiFI6 use cases.
David Roten is a Technical Marketing engineer with Cisco’s Enterprise Routing BU team. For the past 7 years, David has been in his current TME role with the Enterprise BU. During this time he has spoken at several Cisco Live events along with training and customer events globally. Prior to that, he spent a number of years working as a dev-test engineer covering the SIP-600, SIP-400, and SIP-200 linecards on the 7600 platform.
Please see 2 images attaches-- I/O graph, and pcap.
1. What does this specific pattern in this wireless I/O Graph represent?
2. Why does wireless device exchange no packets for approximately 1.5 seconds in a repeating pattern?
We have two branch offices and the WAN is connected through IPsec tunnel. Presently those two office has Couple of AP's and it is connected to DC WLC in local- Centralize switching mode. Now we are planning to enable Flex Connect mode to branch...
I am configured HA in mobility Express
I have the mobility Express solution working correctly with an AP Master and the rest are slaves.
I configure the HA, it takes the role of Mobility Express and everything works fine
I turn off the Primary and ever...
Hi every one! I have this kind of issue, I connected a cable in Cat 2960-CX (trunk) and other side SW C9200L-48P-4G this SW we ready connect 9 access point C9115AXI over POE, one time connected, automatic restart this only C9115AXI' ports...i b...
HiI had been using wireless routers for my home usage, made for the consumer market. I was having reliability issues, so decided to switch to a brand like Cisco and purchase one for my home use.I purchased the 145AC access point, and plugged it downstream...