In this session, Abhishek demonstrates the ease with which an end user, that has no network expertise, can connect a WAN router to the network headquarters of their company from any remote location. The event provides a deep-dive into three use cases that detail step-by-step the device on-boarding process for each one. Once the routers are connected to the network, it is possible to explore the WiFi and security features of the ISR 1000 and how they are provisioned.
Abhishek Keswani is a Technical Marketing Engineer for the ISR 800, 900, and 1000 Series routers. Abhishek is extremely passionate about education for all. He holds a bachelor’s degree in engineering and a master’s degree in computer systems networking and telecommunications. Abhishek holds different programming certifications, such as the Python Network Programming, Coursera Programming for Everybody, and different edX certifications.
Is there a way to specifically assign the IW3700's antenna ports to either 2.4GHz or 5Ghz only or 2 Ports for 2.4Ghz and 2 Ports for 5Ghz for a 2x2 MIMO configuration? Would this be done through CLI or the GUI?
I feel like Cisco is straight up lying to me when they call the 1562i internal antenna omnidirectional. https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1560/installation/guide/1560hig/1560_ch1.html Look at the "omnidirectional"...
What does a lightweight access point send when multiple WLCs respond to the "CISCO_CAPWAP-CONTROLLER.localdomain" hostname during the CAPWAP discovery and join process? Does it unicast discovery request to the first WLC that resolves the domain name...
I am trying to join Cisco AIR-AP1562E-B-K9 outdoor AP on our Cisco 5760 WLC, but AP is unable to join the WLC.Please, advise.I tried to run below command from console# capwap ap primary-base WLC-5760 10.x.x.x Jul 6 15:18:28.916: *%CAPWAP-3-DISC...