Webcast recording with George Stefanick: Lessons Learned Deploying an All-Wireless Office
(Live Webcast Tuesday Februaryr 14, 2016 at 11 am Pacific/ 1 pm Eastern / 8 pm Paris)
On this session you can learn more about how to deploy a successful and reliable wireless office. The expert George Stefanick share his hands on experience and best practices, including the good, bad, ugly and hurdles that is needed to overcome for a successful and reliable process. As Wi-Fi speeds increase, some organizations are giving serious consideration to the all wireless office (AWO). The all wireless office, essentially cutting the cord for good, could be the next evolution of true Wi-Fi mobility in the enterprise.
George Stefanickis a Wireless Architect employed by a large healthcare system in the Texas Medical Center. His Wi-Fi engineering experience spans nearly two decades and in that time he has provided consulting to many Fortune 500 companies in industries such as healthcare, mining, and hospitality. He maintains a popular Wi-Fi engineering community, the blogMY80211.comand he holds many vendor and vendor neutral certifications.
Also, he has been Technical Editor for two books related to Wireless Network technology: ”CCNA Wireless Study Guide” by Todd Lammle and ”Designing and Deploying 802.11 Networks: A Practical Guide to Implementing 802.11n and 802.11ac Wireless Networks for Enterprise-Based Applications” by Jim Geier .
As a member of the Cisco Support Community, George has been awarded with aCisco Designated VIPstatus, a recognition that Cisco bestows upon the most valuable and influential members of their official technical support community.
We look forward to your participation. Please Share this event in your social channels.
Are you a Cisco customer or partner and have a technical question? Get answers before opening a TAC case by visiting the Cisco Support Community.
We are happy to announce the first refresh of 8.10MR4 Beta Program for PRODUCTION deployments.
22.214.171.124 is the first qualified Beta Image and is fully BU supported.
After previous 8.10 MR3 CCO, this program is focused ...
Hi. I have borrowed an AIR-AP1840I-E-K9 access point to perform some tests on radio signals so I'm not that familiar with the configuration of this access point. It used to work fine and the DHCP would assign an IP address to my PC as it should, but after...
Hello guys, I have a WLC in IP 126.96.36.199/24, when a controller all APs, and I have two others networks (188.8.131.52/24 and 184.108.40.206/24).All networks are communicating (all responds pings, in my firewall I will enable all communication between...
Hi guys, i am having a weird issue post upgrade of HA WLC 5520 from 220.127.116.11 to 18.104.22.168. The previous active unit is standby and current active box i do see APs associated. The problem is when i failover the WLC, the actual active unit unable to get th...