cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
492
Views
0
Helpful
3
Replies

1130AG AP RADIUS Suport

aricardor
Level 1
Level 1

I have RADIUS from Windows 2016. It works fine until 4 days. I see error 22 in Event, security, problem with EAP. Finally, I configured the 20 AP with WPA2 without RADIUS, pre-shared key.
The AP are AIR-AP1131AG-E-K9, firmware version 12.3(8)JA2, 10 o more years old.
Is it compatible RADIUS from Windows 2016 with that model o firmware?
Thanks!

 

3 Replies 3

Ric Beeching
Level 7
Level 7
Yes, the AP is just a middle man if using external RADIUS so it shouldn't matter which server is used. Seeing as it was working, there must be another issue on either client or server side.. what policy/eap type are you using on the server?

Ric
-----------------------------
Please rate helpful / correct posts

superego
Level 1
Level 1

Check the NPS certificate.

Haydn Andrews
VIP Alumni
VIP Alumni

The AP will work with that RADIUS server.

As it stopped working 4 days ago, check the certificate on the RADIUS server.

Ensure that the AP or WLC (dependent on if LWAP or autonomous mode) is added as a network device to RADIUS. 

You should be able to look at the RADIUS logs to understand why its failing and search the error codes given in the NPS forums

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card