cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

94
Views
0
Helpful
4
Replies
Highlighted
Beginner

1562 ME gi0/0/1 tx/rx errors/discards

Hello -

We have a 1562 ME 8.5 with gi0/0/1(DS) showing BILLIONS of tx/rx errors/discards in SolarWInds.

The Master AP is directly connected to a Fortigate FW on a untrusted port natted to a trusted IP address.

Wired0 has no packet drops & the device is serving clients properly.

 

The following is the "show stats switch detailed" output:

 

RECEIVE
Octets........................................... 4243466331
Total Pkts....................................... 65808475
Unicast Pkts..................................... 0
Multicast Pkts................................... 0
Broadcast Pkts................................... 0
Pkts Discarded................................... 3694783185

TRANSMIT
Octets........................................... 0
Total Pkts....................................... 402653184
Unicast Pkts..................................... 217065563
Multicast Pkts................................... 3489660928
Broadcast Pkts................................... 217065563
Pkts Discarded................................... 898161759

ADDRESS ENTRIES
Most Ever Used................................... 1
Currently In Use................................. 1

VLAN ENTRIES

--More-- or (q)uit
Maximum.......................................... 128
Most Ever Used................................... 1
Static In Use.................................... 1
Time Since Ctrs Last Cleared..................... 53 day 23 hr 33 min 45 sec

 

Any & all cause or solution ideas are greatly appreciated.

 

Thank you in advance,

Dave H.

4 REPLIES 4
VIP Advisor

Re: 1562 ME gi0/0/1 tx/rx errors/discards

Hi

 Try to clear the stats and see if this value is increasing. This numbers can represent some event in the past and therefore has not relevance anymore. 

 

 

-If I helped you somehow, please, rate it as useful.-

Beginner

Re: 1562 ME gi0/0/1 tx/rx errors/discards

Flavio -



Thanks for the reply.



Still having huge discards.



See below for results:



(AFC_ME_1562_N.CAMB) >clear stats switch ?

(AFC_ME_1562_N.CAMB) >clear stats switch

Are you sure you want to clear the switch stats? (y/n) y



Switch Stats Cleared.

(AFC_ME_1562_N.CAMB) >show stats switch ?



detailed Display detailed switch statistics.

summary Display switch summary statistics.



(AFC_ME_1562_N.CAMB) >show stats switch de



RECEIVE

Octets........................................... 4243466331

Total Pkts....................................... 1780284928

Unicast Pkts..................................... 3618409385

Multicast Pkts................................... 2622195713

Broadcast Pkts................................... 2224815872

Pkts Discarded................................... 3316327268



TRANSMIT

Octets........................................... 2474327434

Total Pkts....................................... 573656505

Unicast Pkts..................................... 2415919104

Multicast Pkts................................... 3282450570

Broadcast Pkts................................... 2691392997

Pkts Discarded................................... 794835338



ADDRESS ENTRIES

Most Ever Used................................... 1

Currently In Use................................. 1



VLAN ENTRIES



--More-- or (q)uit

Maximum.......................................... 128

Most Ever Used................................... 1

Static In Use.................................... 1

Time Since Ctrs Last Cleared..................... 0 day 0 hr 0 min 21 sec



(AFC_ME_1562_N.CAMB) >clear stats switch ?

(AFC_ME_1562_N.CAMB) >clear stats switch

Are you sure you want to clear the switch stats? (y/n) y



Switch Stats Cleared.

(AFC_ME_1562_N.CAMB) >show stats switch ?



detailed Display detailed switch statistics.

summary Display switch summary statistics.



(AFC_ME_1562_N.CAMB) >show stats switch detailed



RECEIVE

Octets........................................... 539271002

Total Pkts....................................... 167837184

Unicast Pkts..................................... 3618409385

Multicast Pkts................................... 2620622849

Broadcast Pkts................................... 613940992

Pkts Discarded................................... 3323667556



TRANSMIT

Octets........................................... 0

Total Pkts....................................... 2483027969

Unicast Pkts..................................... 217065564

Multicast Pkts................................... 1811939328

Broadcast Pkts................................... 3975161947

Pkts Discarded................................... 469313371



ADDRESS ENTRIES

Most Ever Used................................... 1

Currently In Use................................. 1



VLAN ENTRIES



--More-- or (q)uit

Maximum.......................................... 128

Most Ever Used................................... 1

Static In Use.................................... 1

Time Since Ctrs Last Cleared..................... 0 day 0 hr 0 min 11 sec






VIP Advisor

Re: 1562 ME gi0/0/1 tx/rx errors/discards

Run " show int " and let´s see some information like those highlighted below:

 

MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Auto-duplex, Auto-speed
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
30 second input rate 0 bits/sec, 0 packets/sec
30 second output rate 0 bits/sec, 0 packets/sec
2 packets input, 128 bytes, 0 no buffer
Received 0 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
1 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out

 

 

-If I helped you somehow, please, rate it as useful.-

 

 

 

Beginner

Re: 1562 ME gi0/0/1 tx/rx errors/discards

Flavio -



"show int" command not available in 5.8 ME command set.



AP is connected directly to a FW port with no similar command available like there would be on a cisco switchport.



Thank you,


CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards