cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
776
Views
5
Helpful
2
Replies
Highlighted

1852i unable to join mobility express controller

Hi to all!

 

im unable to configure and work cisco aironet 1852i.

 

i already set an IP 192.168.1.40 as management IP and im able to view via web.

however when im creating ssid. i wasnt able to see on my phone. please see the below. this will serve as controller also. i didnt set any DHCP server. we already have on our router.

 

 

pic2.PNGPIC1.PNG

 

 

3.PNG4.PNG5.PNG

2 REPLIES 2
Highlighted
Beginner

Hi,

 

From the look on your first screenshot you dont have any APs. Is there a DHCP server on the Vlan you connected the AP? Also is the IP 192.168.1.40 on that subnet?

 

The controller and AP needs to be in the same subnet and if you dont specify a static IP on the AP module (not controller module) a dhcp server needs to be available on the vlan. This is the nativ vlan if you have the AP on a trunk port.

 

regards,
Jonas
**Don't forget to rate helpful posts**

Highlighted
Cisco Employee

This is a bit strange if the AP can't join itself (ME)
There is a possibility that you set the IP address of the ME and AP to be the same.

 

The following commands will help you analyze the problem.

 

apciscoshell

show ip int brief

debug capwap client events