cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
512
Views
6
Helpful
3
Replies

About WLSE

imane
Level 1
Level 1

I want to know the nature of WLES (hard or soft), and where I can download it?

Thank you

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Imane,

Have a look at these docs;

Overview of the Wireless LAN Solution Engine

The WLSE is a hardware and software solution for managing Cisco wireless devices. The WLSE has the following major features:

Configuration and Firmware

The configuration feature allows you to apply a set of configuration changes to access points and bridges and to archive configurations. Using the firmware feature, you can upgrade the firmware on access points and bridges.

Reporting

Allows you to display reports for tracking device, client, and security information. Reports can be emailed, printed, and exported.

Fault and Policy Monitoring

Provides device monitoring for fault and performance conditions, monitoring of authentication server responses, and monitoring of policy misconfigurations.

Radio Management

Helps you manage your WLAN radio environment. All the device information shown under this tab is polled from the managed devices in your network. Radio Manager features simplify the deployment, expansion, and day-to-day management of the WLAN.

Site Management

Displays a graphical view of the WLAN environment.

Intrusion Detection System (IDS)

Displays intrusion detection information for devices in your network and allows you to manage IDS settings and set up IDS notifications.

Voice Management

Allows you to display voice call information for devices in your network, manage voice settings, and set up voice notifications.

The WLSE works by gathering fault, performance, and configuration information about Cisco devices that it discovers in your network. The devices must be properly configured for discovery. After devices are discovered, you decide which devices to manage with the WLSE.

CiscoWorks Wireless LAN Solution Engine (WLSE)

http://www.cisco.com/en/US/products/sw/cscowork/ps3915/index.html

CiscoWorks Wireless LAN Solution Engine (WLSE) Express

http://www.cisco.com/en/US/products/ps6379/index.html

User Guide for the CiscoWorks WLSE and WLSE Express, 2.13

http://www.cisco.com/en/US/products/sw/cscowork/ps3915/products_user_guide_book09186a008061ab4f.html

Hope this helps!

Rob

Please remember to rate helpful posts........

View solution in original post

3 Replies 3

Rob Huffman
Hall of Fame
Hall of Fame

Hi Imane,

Have a look at these docs;

Overview of the Wireless LAN Solution Engine

The WLSE is a hardware and software solution for managing Cisco wireless devices. The WLSE has the following major features:

Configuration and Firmware

The configuration feature allows you to apply a set of configuration changes to access points and bridges and to archive configurations. Using the firmware feature, you can upgrade the firmware on access points and bridges.

Reporting

Allows you to display reports for tracking device, client, and security information. Reports can be emailed, printed, and exported.

Fault and Policy Monitoring

Provides device monitoring for fault and performance conditions, monitoring of authentication server responses, and monitoring of policy misconfigurations.

Radio Management

Helps you manage your WLAN radio environment. All the device information shown under this tab is polled from the managed devices in your network. Radio Manager features simplify the deployment, expansion, and day-to-day management of the WLAN.

Site Management

Displays a graphical view of the WLAN environment.

Intrusion Detection System (IDS)

Displays intrusion detection information for devices in your network and allows you to manage IDS settings and set up IDS notifications.

Voice Management

Allows you to display voice call information for devices in your network, manage voice settings, and set up voice notifications.

The WLSE works by gathering fault, performance, and configuration information about Cisco devices that it discovers in your network. The devices must be properly configured for discovery. After devices are discovered, you decide which devices to manage with the WLSE.

CiscoWorks Wireless LAN Solution Engine (WLSE)

http://www.cisco.com/en/US/products/sw/cscowork/ps3915/index.html

CiscoWorks Wireless LAN Solution Engine (WLSE) Express

http://www.cisco.com/en/US/products/ps6379/index.html

User Guide for the CiscoWorks WLSE and WLSE Express, 2.13

http://www.cisco.com/en/US/products/sw/cscowork/ps3915/products_user_guide_book09186a008061ab4f.html

Hope this helps!

Rob

Please remember to rate helpful posts........

rmushtaq
Level 8
Level 8

WLSE is an appliance, which mean that the software comes loaded on a piece of hardware. You cannot just download and install the software on any other box. See http://www.cisco.com/en/US/products/sw/cscowork/ps3915/ for more details.

thanks for help me ;-)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card