cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

115
Views
0
Helpful
1
Replies
Beginner

Access Controller Synchronization issue

In cases when primary and secondary controller is connected as HA. If secondary controller goes down for 10-15 min should I have to manually trigger synchronization form primary controller if secondary become up after 15 min. Please help me on this issue. And also if possible provide any document. Is there any dead time from primary controller?

1 REPLY 1
VIP Mentor

Re: Access Controller Synchronization issue

You should not need to do any manual synchronization.

 

As long as redundancy status is good, it should sync with primary. What's the output of "show redundancy summary" output looks like.

 

Here is the documentation

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html 

 

HTH

Rasika

*** Pls rate all helpful responses ***

CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards