I have a customer who has a BBSM 5.3A which is running the latest patch (5332) and it cannot discover 1242 series AP's as valid network elements. They get the following:
2009/01/07 12:01:53 Pinging X.X.X.X...
2009/01/07 12:01:53 X.X.X.X is ACTIVE
2009/01/07 12:02:18 X.X.X.X: not a Network Element or SNMP password is not ******
2009/01/07 12:02:18 Pinging X.X.X.X...
2009/01/07 12:02:23 X.X.X.X: no response
2009/01/07 12:02:23 Pinging X.X.X.X...
2009/01/07 12:02:23 X.X.X.X is ACTIVE
2009/01/07 12:02:47 X.X.X.X: not a Network Element or SNMP password is not ******
2009/01/07 12:02:47 Pinging X.X.X.X...
2009/01/07 12:02:47 X.X.X.X is ACTIVE
2009/01/07 12:03:12 X.X.X.X: not a Network Element or SNMP password is not ******
2009/01/07 12:03:12 Pinging X.X.X.X...
2009/01/07 12:03:12 X.X.X.X is ACTIVE
2009/01/07 12:03:37 X.X.X.X: not a Network Element or SNMP password is not ******
They have assured me that the SNMP info is correct as they have checked it several times but the BBSM still doesn't recognise the 1242's. I know that the document link above specifies that 1200's are supported but don't Cisco class the old 1200's, 1230's and 1242's as different? Also, the BBSM didn't recognise some of their 2960-24 switches as valid network elements either but they selected the object type themselves from the list.
Hi, My customer wants to Download a report of users with MAC addresses who logged in June 2020. He is using PRTG but that Server is not connected with WLC. What we need to do to achieve this goal? Thanks in advance. Regards,Waqas
[ The link to the discussion will be published on November 10th ]
This event is an opportunity to discuss the LTE market trends from a consumer perspective, highlighting the 4G LTE service from Cisco Enterprise BU. Furthermore, we will discuss the strateg...
Hi All,We have 9100 AP trying to join on 9800 WLC. When AP try to join controller it gives below error Sending Join request to 172.16.31.66 through port 5254Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Join(5)Discarding msg CAPWAP...
Hello, I hope somebody has a solution for the issue I am facing. I have 2 WAP150's, both with firmware 18.104.22.168, and I am not able to save a specific change. Under Wireless > Radio > Advanced Settings > Legacy Rate Sets I can unselect ra...