We have Cisco AP set up around our buiding. We also have a Cisco ACS server set up. Some of our domain users are able to go our customers sites which are on different domains and are thier work laptops to gain access to thier own domains. I know the customers are using RADAIUS and ARUBA.
I have been asked if we can allow customers to come to this office and allow then to log onto thier laptops, connect remotly through our wireless and let them connect to thier domain.
I believe this is possible through the ACS server, The ACS server would have the customer domain name configured in user and identity, Radius identity servers. The user would log in and authenticate and would be directed through a different vlan to the cust AD. Unfortunatly I am not an expert on the ACS and to be honest this is my first time that I have ever used this or set up wireless.
I have set up a test AP that is connected to the ACS. We have a Windows 7 laptop that is not on the co-perate domain that I am having issues connecting to the ACS.
The first problem was that the ACS sees the laptop and issues a certificate error -
I am currently going through the ACS manual, I understand that the ACS needs to authenticate the host (laptop) first. I will be using the external identity store as the laptop is not on the coperate domain, I cannot use LDAP, AD, RSA as an external identity store.
My questions are below and I would be grateful for any feedback
1, Can I use the Radius Identity Server?
2, Would I need to use certificates as well an external identity store, or can I use just the one.
[ The link to the discussion will be published on November 10th ]
This event is an opportunity to discuss the LTE market trends from a consumer perspective, highlighting the 4G LTE service from Cisco Enterprise BU. Furthermore, we will discuss the strateg...
Hi All,We have 9100 AP trying to join on 9800 WLC. When AP try to join controller it gives below error Sending Join request to 172.16.31.66 through port 5254Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Join(5)Discarding msg CAPWAP...
Hello, I hope somebody has a solution for the issue I am facing. I have 2 WAP150's, both with firmware 188.8.131.52, and I am not able to save a specific change. Under Wireless > Radio > Advanced Settings > Legacy Rate Sets I can unselect ra...
Hey Guys,I Have several 1600 Series AP's (AIR-CAP1602I-ZK9) that was working with WLC before, I changed them with 1800 series but would like to use 1600 Access Points series independently and without WLC for somewhere else, so I want to know do they...