cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
180
Views
0
Helpful
1
Replies
Highlighted
Beginner

AIR-AP1562I-Z-K9 unable to join WLC

Hello guys 


We are having difficulties joining this AP to our WLC currently running version 8.3.133.0

 

[*05/24/2019 12:53:53.2050] CAPWAP State: Discovery
[*05/24/2019 12:53:53.2052] Got WLC address 10.252.207.123 from DHCP.
[*05/24/2019 12:53:53.2093] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*05/24/2019 12:54:02.7075] WTP IP address changed from 0.0.0.0 to 10.232.40.62, restart CAPWAP.
[*05/24/2019 12:54:02.7076]
[*05/24/2019 12:54:02.7076]
[*05/24/2019 12:54:02.7076] Lost connection to the controller, going to restart CAPWAP...
[*05/24/2019 12:54:02.7076]
[*05/24/2019 12:54:02.7076] Restarting CAPWAP State Machine.
[*05/24/2019 12:54:02.7121] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Discovery(2).
[*05/24/2019 12:54:02.7123]
[*05/24/2019 12:54:02.7123] CAPWAP State: DTLS Teardown
[*05/24/2019 12:54:02.7147] Socket Invalid Element wcp/wcp_db Handler capwap_state Data 0 Length 10
[*05/24/2019 12:54:07.4592]
[*05/24/2019 12:54:07.4592] CAPWAP State: Discovery
[*05/24/2019 12:54:07.4593] Got WLC address 10.252.207.123 from DHCP.
[*05/24/2019 12:54:07.4632] Discovery Request sent to 10.252.207.123, discovery type DHCP(2)
[*05/24/2019 12:54:07.4633] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*05/24/2019 12:54:07.4644] Discovery Response from 10.252.207.123
[*05/24/2019 12:54:07.4644]
[*05/24/2019 12:54:07.4644] This AP model is supported by controller version newer than 8.3.15.180!
[*05/24/2019 12:54:07.4644]
[*05/24/2019 12:54:07.4644] Discovery response from MWAR ''running version 0.0.0.0 is rejected.
[*05/24/2019 12:54:07.4645] Failed to decode discovery response.
[*05/24/2019 12:54:07.4645] CAPWAP SM handler: Failed to process message type 2 state 2.
[*05/24/2019 12:54:07.4645] Failed to handle capwap control message from controller - status 4
[*05/24/2019 12:54:07.4645] Failed to process unencrypted capwap packet 0xb92000 from 10.252.207.123
[*05/24/2019 12:54:07.4645] Failed to send capwap message 0 to the state machine. Packet already freed.
[*05/24/2019 12:54:07.4645] IPv4 wtpProcessPacketFromSocket returned 4

 

Is there anyone who has managed to get to connect without having having to update the WLC version?

 

Thankyou in advance

John Kurewa 

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Guru

Re: AIR-AP1562I-Z-K9 unable to join WLC


@takue01 wrote:

Is there anyone who has managed to get to connect without having having to update the WLC version?


Of course not. The controller needs to be running 8.4.X.X (or later) to be able to support 1560.

If the WLC cannot be upgraded to 8.4.X.X (or later), then get an AP that will support Mobility Express.

1 REPLY 1
Hall of Fame Guru

Re: AIR-AP1562I-Z-K9 unable to join WLC


@takue01 wrote:

Is there anyone who has managed to get to connect without having having to update the WLC version?


Of course not. The controller needs to be running 8.4.X.X (or later) to be able to support 1560.

If the WLC cannot be upgraded to 8.4.X.X (or later), then get an AP that will support Mobility Express.

CreatePlease to create content