cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1088
Views
0
Helpful
4
Replies

AIR-LOC2710-L-K9 Password Recovery

JakeMIGSMN
Level 1
Level 1

I just bought one of these in and it was in production and I have no way of getting a hold of the login information. Is there a way to wipe these to factory defaults? I have been looking everywhere with no such luck.

1 Accepted Solution

Accepted Solutions

Surendra BG
Cisco Employee
Cisco Employee

Hi Jacob,

Here is the link which gives us the step by step procedure and help us to get the issue resolved!! Lemme know if this answered ur question!!

http://www.cisco.com/en/US/partner/products/ps6386/products_password_recovery09186a00807f42f9.shtml

Please dont forget to rate the usefull posts!!

Regards

Surendra

Regards
Surendra BG

View solution in original post

4 Replies 4

Surendra BG
Cisco Employee
Cisco Employee

Hi Jacob,

Here is the link which gives us the step by step procedure and help us to get the issue resolved!! Lemme know if this answered ur question!!

http://www.cisco.com/en/US/partner/products/ps6386/products_password_recovery09186a00807f42f9.shtml

Please dont forget to rate the usefull posts!!

Regards

Surendra

Regards
Surendra BG

Thank you very much, this worked perfect!

This link is now behind a paywall.

I guess the document isn't anymore available because of website redesigns.
With most wireless products, attach a console cable and/or keyboard+display and reboot the appliance. Some devices show then a message like "Enter reset now to reset to factory defaults" or similar, which at least allow a reset.
Review Cisco Networking products for a $25 gift card