04-08-2014 07:07 AM - edited 07-05-2021 12:38 AM
Hello,
I can use the Application Visibility And Control does not block the traffic from Bittorrent? Or have I misunderstood?
However, I have on my WLC 2504 that configures goes Bittorrent still.
Regards
Solved! Go to Solution.
04-08-2014 09:22 AM
Hi,
Have you checked whether you have applied this to a WLAN - go to WLANS -> WLAN ID ->look at AVC profile.
Have a look at this document here
http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/115756-avc-guide-00.html
HTH
Mike
04-08-2014 09:22 AM
Hi,
Have you checked whether you have applied this to a WLAN - go to WLANS -> WLAN ID ->look at AVC profile.
Have a look at this document here
http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/115756-avc-guide-00.html
HTH
Mike
04-14-2014 02:42 AM
Thanks, this was my problem!
04-10-2014 09:15 PM
Here is the protocol list supported in NBAR2
I can see "bittorrent", "encrypted-bittorrent", "bittorrent-networking" as recognised protocol in the list, but nothing for utorrent.
From WLC code 7.5 onwards you can update these protocol packs on your controller (see below for more detail)
http://www.cisco.com/en/US/docs/wireless/controller/technotes/7.5/AVC_dg7point5.html
Protocol pack 4.1.1 is the latest for 7.5 code. Here is the more information about it.
http://www.cisco.com/en/US/docs/wireless/controller/nbar2_prot_pack/4.1.1/b_nbar2_prot_pack_411.html
Latest protocol pack (pp-AIR-7.6-13-6.3.0.pack) is available for 7.6 code version if you would like to test it out.
04-14-2014 02:42 AM
Hello,
@ nkumarsr The protocol pack is not compatible with WLC 2504 or?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide