02-25-2011 08:57 AM - edited 07-03-2021 07:52 PM
Hello
I suspect this is going to be a quick question.
Do the 1131AG APs support band select from a 4400 WLC running version 7?
I've done a bit of googleing about and I cant really find any yes/no answers.
Thanks
Solved! Go to Solution.
02-25-2011 09:25 AM
Hi,
Band selection can be used only with Cisco Aironet 1140 and 1250 Series, and the 3500 series access points.
1131 does not support as per the configuration guide 7.0
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70ccfg.html#wp1934253
Lemme know if this answered your question!!
Regards
Surendra
02-25-2011 09:25 AM
Hi,
Band selection can be used only with Cisco Aironet 1140 and 1250 Series, and the 3500 series access points.
1131 does not support as per the configuration guide 7.0
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70ccfg.html#wp1934253
Lemme know if this answered your question!!
Regards
Surendra
02-25-2011 04:05 PM
Do not enable "Band Select" on Voice SSID.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: