12-19-2018 09:39 PM - edited 07-05-2021 09:37 AM
Hi,
Network Switch, with at least 24-Ports 10/100/1000BASE-T PoE-plus (RJ45), at least 2x 1GbE SFP ports, at least another 2x 10GbE SFP+ ports, and redundant power supply
will this switch (WS-C3650-24PD-L) support the above requirements? Please advice me.
Solved! Go to Solution.
12-20-2018 02:56 AM - edited 12-20-2018 02:59 AM
If you are looking for a switch that can provide PoE+ (30w) to all 24-ports, then the options are:
NOTE: I deliberately did not put 9200.
12-19-2018 09:53 PM
Yes, make sure that really need LAN base features, not IP base or Enterprise to get your work done.
Also make sure you get the spare power supply(PWR-C2-640WAC=), switch comes with only 1
12-19-2018 10:26 PM
12-19-2018 10:37 PM - edited 12-19-2018 10:42 PM
@leyakhath muhammed wrote:
PWR-C2-640WAC= Does it supports 24 Port (30W)POE+? How many AP(POE+) can support?
How can I calculate POE+ on a switch Please advice me?
PWR-C2-640WAC is a 640 watt AC power supply (and is not a switch model).
@leyakhath muhammed wrote:
Does it supports 24 Port (30W)POE+?
Let's do the maths. How many PoE+ ports do you need? 24? Ok, so what is the total of 24 x 30? 720, correct? So this tells me that the 640 watts AC power supply (PWR-C2-640WAC) is insufficient to provide PoE+ power.
Next, if you look at the Data Sheets for the 3650, 3850 and 9300 the "smallest" power supply required for a 24-port is a 715 watt power supply.
If you are looking for a switch that can provide PoE+ (30w) to all 24-ports, then the options are:
12-19-2018 10:16 PM
@leyakhath muhammed wrote:
Hi,
Network Switch, with at least 24-Ports 10/100/1000BASE-T PoE-plus (RJ45), at least 2x 1GbE SFP ports, at least another 2x 10GbE SFP+ ports, and redundant power supply
Not it won't.
Look at the product code. It is "PD". P means PoE. "D" means 2xSFP/SFP+ ports only.
If you want two SFP+ ports and two more SFP ports then you're looking at a 3850 with C3850-NM-4-10G or a 9300 with C9300-NM-8X or C3850-NM-4-10G.
Please note: Existing 3850 network modules are also supported in the Cisco Catalyst 9300 Series platforms. -- 9300 Data Sheet
12-20-2018 02:31 AM
12-20-2018 02:56 AM - edited 12-20-2018 02:59 AM
If you are looking for a switch that can provide PoE+ (30w) to all 24-ports, then the options are:
NOTE: I deliberately did not put 9200.
12-20-2018 04:05 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: