07-10-2019 05:30 AM - edited 07-05-2021 10:41 AM
Hello,
I have an isssue to configure the catalyst 9800 for network-assurance, first problem is that the token may not be loger than 127 characters, and the generated token on the DNAC the PEM file is longer, I only found examples for the airos but not for the C9800 - we have DNAC 1.3 and Catalyst is on 16.11.1c, can you help or is there a docummentation that describes the steps (dd not found it)
Thanks,
Peter
10-16-2019 02:14 AM
10-16-2019 02:45 AM
Hi Dominic,
Problem was solved token for the catalyst 9800 is not needed.
The problem was that the device controllability was disabled.
Best Regards,
Peter
10-16-2019 03:43 AM
Hi Peter
sorry for the stupid question, but what did you exactly configure, to get it working? Do you have a printscreen of the required configuration (for example Cisco C9800 GUI > Configuration > Services > Cloud Services or Cisco C9800 CLI)?
Best regards
Dominic
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: