01-23-2013 01:53 PM - edited 07-03-2021 11:24 PM
Hi. I cannot TFTP this tar file to both 1230 and 1231 APs. Both are lightweight APs that I've wiped to the rommon mode (ap>) and I issue the command:
tar -xtract c1200/k9w7-mx.123-8.JA 10.0.0.2
And I get a error saying: "permission denied"
Notes:
The AP has defaulted to the 10.0.0.1 IP.
My laptop is set to 10.0.0.2 255.255.255.0 IP
My TFTP-Server is on and the root folder with the .tar file is in there.
ether_init, flash_init, tftp_init (these commands have been executed)
My firewall is disabled.
SO, with all that being said, WHY DOESN'T THIS WORK!???
01-28-2013 08:36 AM
you need to remove that last .tar
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
01-24-2013 09:24 PM
There's one thing left. Change your computer.
I was doing this process on a 3600 AP but wouldn't. Once I changed to another computer, things started to work.
01-28-2013 08:26 AM
I did. I tried it on a Win 7 and an XP machine.
01-28-2013 08:27 AM
OH forget this! I'm just going to connect these LWAPPs to a 4400 controller and convert them that way. Good lord.
Thanks for your input all!
****The question is UNANSWERED and closed!****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide