Cisco 1700 LIghtweight Access Point not Assigning IP addresses
I have a Cisco 1700 Access Point that is not assigning IP addresses on 1 specific SSID. All other SSIDs are working as normal. The AP can reach DHCP and there are more than enough IP addresses available for this location. The AP is associated with a Cisco 5508 Wireless Controller. I've tried to compare the AP's configuration with other working APs and from what I can see is that everything is setup as expected. Can someone provide a checklist of items to check? Any ideas to solve this? Thank you.
Hi, My customer wants to Download a report of users with MAC addresses who logged in June 2020. He is using PRTG but that Server is not connected with WLC. What we need to do to achieve this goal? Thanks in advance. Regards,Waqas
[ The link to the discussion will be published on November 10th ]
This event is an opportunity to discuss the LTE market trends from a consumer perspective, highlighting the 4G LTE service from Cisco Enterprise BU. Furthermore, we will discuss the strateg...
Hi All,We have 9100 AP trying to join on 9800 WLC. When AP try to join controller it gives below error Sending Join request to 172.16.31.66 through port 5254Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Join(5)Discarding msg CAPWAP...
Hello, I hope somebody has a solution for the issue I am facing. I have 2 WAP150's, both with firmware 220.127.116.11, and I am not able to save a specific change. Under Wireless > Radio > Advanced Settings > Legacy Rate Sets I can unselect ra...