Cisco Aironet 1572EAC AC power cap

[ColtonMohrland25561]

I am installing the Cisco Aironet 1572EAC WAP and pg. 48 of the installation instructions points to 2 different caps to cover the AC power input. We are using PoE for the device so do I need to cover the AC input with Remke cap 75-0086 or the AIR-ACC15-AC-CAP=

[Sandeep Choudhary]

Hi,

If you are using PoE directly from a switch or powering via DC, then you will need to order AIR-ACC15-AC-CAP=.

Regards

Dont forget to rate helpful posts

[ColtonMohrland25561]

I saw that too, and I guess I'm confused because it sounds like both caps are made to cover the same thing. So wouldn't either work? I already ordered the Remke cap before I re-read that part.