cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
319
Views
0
Helpful
3
Replies
Highlighted
Beginner

Cisco WLC 5508 Redundancy Feature

All,


With version 7.3 there is a feature for redundancy. How does this feature work? Does anyone know? Can it be use where it is not directly connected, but can be connected as a layer 2?

3 REPLIES 3
Highlighted
Hall of Fame Master

Re: Cisco WLC 5508 Redundancy Feature

There have always been redundancy. v7.3 introduced HA AP SSO... did not really start off pretty well. Even with v7.4, there are still some open issues.

Here is how redundancy has always been implemented.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml

Here is the new feature HA

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3504.shtml

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Highlighted
Hall of Fame Master

Re: Cisco WLC 5508 Redundancy Feature

Oh.. Here is HA N+1 which is stable compared to HA AP SSO.

http://www.cisco.com/en/US/docs/wireless/technology/hi_avail/N1_High_Availability_Deployment_Guide.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Beginner

Re: Cisco WLC 5508 Redundancy Feature

Hi Scott,

For the moment do you preconize HA N+1 with V7.4 or AP SSO V7.3 on WLC5508 ?

I also will install Pi version 1.2 , does it support controllers 5508 in version 7.4? Refering to config guide I would say yes ..

Thanks

CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards