02-25-2020 01:38 AM - edited 07-05-2021 11:46 AM
Hello
i simply wanna make WLC 5508 to send SNMP Traps to some free SNMP Trap Receiver, when an Access Point goes down, as Wireless Control Server is outdated and i need a simply solution to be informed when Access Point is not reachable.
Installed some freeware tools but somehow i dont get what i want.
Thanks for any hints or help on this!
Solved! Go to Solution.
02-25-2020 10:17 AM
Ref : https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/olh/wlc-olh-81/mgmtc.html#63295
Check the AP Tab and possible trap-settings ; check what resembles most for what you need.
M.
02-25-2020 10:17 AM
Ref : https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/olh/wlc-olh-81/mgmtc.html#63295
Check the AP Tab and possible trap-settings ; check what resembles most for what you need.
M.
02-26-2020 02:32 AM
Yep i did that already, checking now with Sevone as SNMP Trap receiver and proper MIB what we can do here.
Thank you!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: