cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
509
Views
0
Helpful
9
Replies
Highlighted

Clients Ip information not showing on controller 2504

Im not able to see the wireless clients IP information when i click on clients session. i can see client mac,ap name nd ssid bit not the IP information.Im using controller 2504 running firmware 7.4

Sent from Cisco Technical Support iPhone App

9 REPLIES 9
Highlighted
Cisco Employee

  1. The IP information isn't showing on the Client page or
  2. The client is even getting an IP address?

My guess is #2....

Highlighted

If #2,

from the 2504 WLC run the command debug mac addr

Highlighted

Clients are getting ip.But for monitoring purpose it should be shown in clients sessiom on controller along with other details.But other details are showing ip details row is not therw.

Sent from Cisco Technical Support iPhone App

Highlighted

How about fromt the CLI of the 2504? - show client detail

Highlighted

Also, what version of 7.4?

Highlighted
Beginner

Does the WLAN have the *Require DHCP address**  configured?

That will make sure each client obtains the IP and learns it during the process.

If the client doesn't receive an IP address, ensure that the interface on the WLC has a DHCP server configured as to where to send all DHCP requests to.

**Please rate post if helpful**

Highlighted

It should show like this . But its not showing ip. Clients are getting ip but not displaying that like this.

Sent from Cisco Technical Support iPhone App

Highlighted

Now its showing like this

Sent from Cisco Technical Support iPhone App

Highlighted

Hi Ameen,

Please SSH into the controller and look at output from the following command:

show client summary

Also please copy and paste the contents of the command:

show sysinfo