Create WCS templates from existing WLC controller?
One of my customers implemented a single WLC over a year ago.
They now want to expand with a second WLC and add WCS for management.
WCS is able to retrieve the current config from a controller which is a nice feature. But what i would like to do is use the config from the primary (existing) WLC, convert that into WCS templates, so i can push the templates to the new controller after initial setup.
If your running 184.108.40.206 or later, it's easier to just backup the config of your existing wlc and then open it in a text editor and change the ip address, host name, etc. then just upload that to the new wl after you get it configured.
Make sure you are running the same code on each wlc. Later code supports auto install feature, but if it's just one wlc, it's easier to just edit the file and upload it.
This event was scheduled for September 23rd, but it has been moved to November 10 due to complex and unexpected circumstances. We apologize for all the issues this may cause.
Community Live- All Things LTE…4G, 5G and Whatever’s Next
(Live event - formerly...
Hello i have acces point 1815i cisco and we want installed in entreprise and we have camera surveillance wireless cisco so i want to know how much distance between ap 1815i and camera surveillance wi...
We want to broadcast a SSID (and allow users to connect) between certain times each day, and then take it offline. Unfortunately we dont have prime and only DNA Essential Smart licencing. All documents that I am seeing is that its possible if you have pri...
Hi all,I am looking for some guidance here, and I am quite certain that some of you, great minds, will be able to stir me in the right direction here. And a big thanks in advance. Here we go, i have three sites connected over private link MPLS....
Hi to all I purchase new AP C9120AXE converted to EWC.I notice when AP is booting a message related to default route not set that it says that can affect performance.Message is : %Default route without gateway, if not a point-to-point interface,...