cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3344
Views
5
Helpful
7
Replies

Enable DHCP scope on WLC for particular WLAN (SSID)

gilbilenilesh
Level 1
Level 1

Hi Team,

my setup consist of below infra

We have fortigate firewall for gateway & internet access.

five access point & one WLC for them to Manage.(AIR-CT2504-K9)

These five access point are having three different WLAN (different SSIDs) 

20 Laptop users which access internet through wifi.

DHCP server configured on fortigate firewall. all clients are getting IP address directly from fortigate firewall.

 

Requirement

We want to setup dhcp server on cisco WLC (AIR-CT2504-K9) for only one SSID so that when user connect to that SSID they will get particular IP Address range & I can restrict those user internet access.

rest of the SSIDs will keep on continue to release IP from fortigate firewall.

Please let me know how can I achieve these without conflicting rest of the setup. 

1 Accepted Solution

Accepted Solutions

Here is the post about internal DHCP scope on WLC:

 

http://netterrene.blogspot.com/2014/08/internal-dhcp-scope-in-cisco-wlc-via-gui.html

 

Regards

Dont forget to rate helpful posts

View solution in original post

7 Replies 7

Sandeep Choudhary
VIP Alumni
VIP Alumni

Yes its possible.

 

1. Create DHCP scope of specific network Which you are using for specific WLAN.

2. Assign DHCP server "WLC Mgmt INterface IP" under the dynamic interface of that wlan for whcih you are having a local dhcp scope on WLC.

 

Regards

Dont forget to rate helpful posts

could you please share document or link for the same

Here is the post about internal DHCP scope on WLC:

 

http://netterrene.blogspot.com/2014/08/internal-dhcp-scope-in-cisco-wlc-via-gui.html

 

Regards

Dont forget to rate helpful posts

patoberli
VIP Alumni
VIP Alumni
You can do that, just make sure that your DHCP range is within the IP range of the virtual interface on the WLC.
Please note that later WLC will drop the DHCP server feature. You can also create ACLs on the WLC to restrict the internet traffic, regardless of the DHCP server.

Sorry for trouble.
I am very new to WLC setup & doing for the first time if you can provide me document or link that will be useful.

There are many docs available online about how to configure internal DHCP on WLC:

 

 

https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/110865-dhcp-wlc.html#anc19

 

Regards

Dont forget to rate helpful posts

Thanks a lot Sandeep. it work
Review Cisco Networking products for a $25 gift card