cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

117
Views
0
Helpful
2
Replies
Beginner

Flex-Link Influence on Switch STP Configuration

Dear,

I have a CORE switch, which is a root bridge of all VLANs in my environment. I want to use flex-link on a particular port. When I set the flex-link feature on my CORE switch interface, will this cause Spanning-tree to be disabled only from the interface I'm setting flex-link to, or will it disable STP from all interfaces on my CORE switch?


thankful

 

Rafael

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Advisor

Re: Flex-Link Influence on Switch STP Configuration

It can co-exist with the same environment as STP, make sure you ready config guidelines, yes you can configure certain network.

 

example reference guide :

 

https://community.cisco.com/t5/networking-documents/how-to-configure-a-flex-link-for-link-level-redundancy-in-cat/ta-p/3133234

BB
*** Rate All Helpful Responses ***
2 REPLIES 2
VIP Advisor

Re: Flex-Link Influence on Switch STP Configuration

It can co-exist with the same environment as STP, make sure you ready config guidelines, yes you can configure certain network.

 

example reference guide :

 

https://community.cisco.com/t5/networking-documents/how-to-configure-a-flex-link-for-link-level-redundancy-in-cat/ta-p/3133234

BB
*** Rate All Helpful Responses ***
Beginner

Re: Flex-Link Influence on Switch STP Configuration

 Doubt answered. Thank you!

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards