cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
284
Views
0
Helpful
3
Replies
Highlighted

FlexConnect Groups Branch Site Backup Soloution

Dear all,

we have a simple Branch Site Backup:

FlexConnect Group with 2 APs and a local Radius. No VLAN and no Flexconnect - LocalSwitching.

We need WiFi working if the dataline ist shutdown and there is no connection to WLC anymore.

If the Client was already connected it can work further. But if there is a new client the authentication will fail?

Can someone Help ?

 

Thanks,

Marco

3 REPLIES 3
Highlighted
Hall of Fame Master

Re: FlexConnect Groups Branch Site Backup Soloution

Only in FlexConnect local switching is where devices can still stay connected.
-Scott
*** Please rate helpful posts ***
Highlighted
Hall of Fame Master

Re: FlexConnect Groups Branch Site Backup Soloution

Here is a doc that helps explain client connectivity in various states:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enterprise_Mobility_8-1_Deployment_Guide/ch7_HREA.pdf
-Scott
*** Please rate helpful posts ***
Highlighted

Re: FlexConnect Groups Branch Site Backup Soloution

Thanks for reply. But at the Moment without activated local switching clients still Connection. Only new clients will fail.

 

the radius is Not only active on Backup. On normal mode AP is already connected there .

 

maybe this is Problem?

 

thanks,

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey