cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
174
Views
0
Helpful
2
Replies
Highlighted

Generate new CSR on WLC

Hi Gents,

It has come to my attention that our cert for guest web auth. has expired; therefore, i need to generate a new cert. Last time i did that i used oppenssl which was a bit messy. Now, i was going trough the note to regenerate a new CSR and found that found that 8.3.x can generate CSR from the WLC. 

 

I have generated CSR through Cisco device before(ASA for instance), before i upgrade the WLC to 8.3. Currently running one version below 8.2.x. I'd like to know, once the CSR has been signed by our third party CSR is there anything else needs to be done, beside just upload the newly cert-received from the CR?

 

Thanks,

2 REPLIES 2
VIP Engager

Re: Generate new CSR on WLC

That depends in what format the signed certificate is. If you're lucky, you don't have to do anything, if you aren't you have to add the root and intermediate into the certificate.
Here the details: https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
ajc Frequent Contributor
Frequent Contributor

Re: Generate new CSR on WLC

I have a written procedure using OpenSSL quite simple which I have used on 8510,5508, 8540, 2500 WLC's. If you are interested send me a note.

CreatePlease to create content