03-11-2013 07:35 AM - edited 07-03-2021 11:42 PM
Hello
Has anybody an idea or official link to a Cisco instruction, how to configure a Cisco ISE to authenticate Cisco IP Telephony via EAP-TLS (802.1x)?
Can anybody help?
Thanks!
Marco
03-11-2013 07:40 AM
HEre you go.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_auth_pol.html#wp1146222
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
03-11-2013 08:05 AM
At first thanks for your rapid answer.
I'm looking more for a guide, how to import the certificate from the UCM and where I can config the RADIUS-Attribut "device-traffic-class=voice"?
03-11-2013 08:16 AM
Ahh, this isn't for a wireless phone is it......take a look at the below guide
https://supportforums.cisco.com/docs/DOC-22478
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
03-11-2013 08:26 AM
This are for wired phones that support EAP-TLS.
I read your link and already know this fakts from other manuals.
Now I want to configure the Cisco ISE to authenticate these IP Phones via 802.1x - EAP-TLS.
But I can not find any Cisco guides for solving this problem.
03-11-2013 08:34 AM
EAP is EAP. it doesn't matter what the end device is. So the same config will work for any device that supports EAP-TLS.
That doc tells you what the attributes are that need to be returned
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
03-11-2013 08:40 AM
Yes ok. So there is no difference between the devices.
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: