How to change Cisco UX domain to location based domain

[ittechk4u1]

Hello experts,

I have bought UX domain Cisco APs but now i want to changed it to my location specific domain. How can i do it ?

Thanks in advance.

[Sandeep Choudhary · Accepted solution]

Hi,

Info: Before activating a UX AP. Make sure the WLC, has the proper software running. Minimum Requirement is 8.0.110.0

First:

Universal AP does not require any particular configurations on Wireless LAN Controller (WLC) to allow Universal AP to associate. Connect the universal SKU AP to the WLC. Once the AP has joined the controller and downloaded the code, you can check the AP model and SKU by going to the WIRELESS tab from the WLC main menu bar.

Second:
Check these blog to review the way to ‘prime’ a UX domain AP.

1. https://sc-wifi.com/2015/10/26/ux-domain-aps/

2. http://www.wificert.org/universal-cisco-ap/

Hope it helps.

Regards

Dont forget to rate helpful posts

[ittechk4u1]

Thank you sandeep.

One more question:

do we need to allow internet access for the universal WLAN?

[Sandeep Choudhary · Accepted solution]

Thanks for rating.

Yes you need to allow internet access via universal wlan. Otherwise how Airprovison app will work!!

Regards

Dont forget to rate helpful posts

[ittechk4u1]

Thanks. I will let you know the result.

[mohammadghazaev1]

Hello

Here you can find the answer: http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/basic_hostname_pw.html