cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
468
Views
0
Helpful
4
Replies

How to check on which APs a wlan profile is activated on WLC4402

Hello,

we use a wlc4402 and several wlan profiles which are activated on different access-points (wlan override).

Does anybody know if there is a possibility to see a summary list of the aps on which a certain wlan profile is activated?

Best Regards,

Thorsten

4 Replies 4

Scott Fella
Hall of Fame
Hall of Fame

Don't know if you call it a summary, but if you run a show run-config or show running-config on the wlc cli, the ap information is in one of those. You then can paste that to notepad or word and do a find .

-Scott
*** Please rate helpful posts ***

Hello,

I tested it but did not get the output I am looking for.

What I am looking for is a list of all wlan profiles and for each wlan profile a list of all ap where it's activated, e.g.:

wlan profile 1

ap1

ap2

ap3

wlan profile 2

ap2

ap5

ap7

...

Does anybody further know how I can set the cli terminal length to 0 so that there is no page break (as term len 0 in ios)?

Regards,

Thorsten

Try config paging enable | disable

-Scott
*** Please rate helpful posts ***

ericgarnel
Level 7
Level 7

If you have WCS, this can be done under the reporting function

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: