cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1318
Views
0
Helpful
2
Replies
Highlighted
Beginner

Increasing VMWare Disk Space For NCS Upgrade

I'm trying to upgrade our NCS infrastructure from 1.3 to 2.0.  I received an error during the upgrade that I needed to increase the number of CPU's, RAM, and disk.  I was able to add the additional CPU, RAM, and disk.  Going through the upgrade again, the only error I receive is about adding space to the /opt directory.  I have over 300GB of memory free, after adding the additional space, so this should satisfy the requirement.  When logging into the NCS ADE-OS, I do a sh disks and see that the OS has not recognized the additional space.  With the backend OS being a Cisco Linux version, is there a command I have to run to get the OS to recognize the additional space?  Any help would be appreciated.  Thanks!

Everyone's tags (4)
2 REPLIES 2

Increasing VMWare Disk Space For NCS Upgrade

Take a look at this document that Rollin put together.

https://supportforums.cisco.com/docs/DOC-35173

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
VIP Mentor

Increasing VMWare Disk Space For NCS Upgrade

one more way to do:

Increasing diskspace on Cisco Prime Infrastructure NCS 1.2 "the hard way?

http://blog.42.be/2013/01/increasing-diskspace-on-cisco-prime.html

also check this one:

https://supportforums.cisco.com/docs/DOC-26960

Regards

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards