cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
656
Views
0
Helpful
3
Replies

ios 7.0.x SSID problems

Mathieu Sturm
Level 1
Level 1

We're having a problem with ios devices for some time now. When connected to an SSID on the iPad I can't switch  to another SSID. I have to use the button "forget this network" to connect with another SSID. Are there others that are facing this problem? It looks like it's not even trying to connect to the WLC.

1 Accepted Solution

Accepted Solutions

Scott Fella
Hall of Fame
Hall of Fame

You need to make sure you have Fast SSID Change enabled on the WLC. This can be found in the WLC GUI under The controller tab.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

View solution in original post

3 Replies 3

Scott Fella
Hall of Fame
Hall of Fame

You need to make sure you have Fast SSID Change enabled on the WLC. This can be found in the WLC GUI under The controller tab.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Thank you Scott, that did the trick

Good to know... Glad that worked for you!

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Review Cisco Networking products for a $25 gift card