cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

297
Views
5
Helpful
2
Replies
Highlighted
Beginner

IPAD Web-Auth after wake up,

                   Many users reported after IPAD wake up , They usually need to do Web-Authentication from Guest wireless network ,

Current , the Guest network is using "passthrough" Web -Auth, and seem this is only happen on IPAD .

I configured " eap bcast-key-interval seconds" to 12 hours, but this won't help ,

Anyone knows what is problem here?

Everyone's tags (5)
2 REPLIES 2
Hall of Fame Master

Re: IPAD Web-Auth after wake up,

You need to set the idle timeout to 4 hours or 14400 seconds. That is what I use. I also set the WLAN SSID session timeout to 8 hours or longer, but the session timeout needs to be greater than the idle timeout. The idle timeout setting is in the Controller tab which is default at 300 seconds.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

IPAD Web-Auth after wake up,

Fan: I fully agree with George. The idle-timeout timer is the timer you need to modify. You set it to a suitable value for your network.

the value of eap bcast-key-interval has no effect here since this only has an effect with users using 802.1x authentication, not web-authentication.

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"

Rating useful replies is more useful than saying "Thank you"
CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards