cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

289
Views
0
Helpful
3
Replies
Highlighted
Beginner

LAP in HREAP (Flexconnect) 7.0.116.0

How long will a LAP configured for HREAP/Flexconnect mode stay in HREAP/Flexconnect mode. 

And is this adjustable through CLI?

Everyone's tags (3)
3 REPLIES 3

LAP in HREAP (Flexconnect) 7.0.116.0

IT will stay in that mode until it is able to reach to the controller again.

What are you looking for inparticular

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Beginner

LAP in HREAP (Flexconnect) 7.0.116.0

Security concerns around a LAP growing legs and walking away with my network configuration for locally switched WLANs.

Are there any configuartion changes that can be made to limit a HREAP/Flexconnect LAPs configuarion availability before it must be re-associated to a WLC?

Cisco Employee

LAP in HREAP (Flexconnect) 7.0.116.0

How long will a LAP configured for HREAP/Flexconnect mode stay in HREAP/Flexconnect mode.

//Until you change the mode to something else on the wlc for that AP.

Security concerns around a LAP growing legs and walking away with my network configuration for locally switched WLANs.

//AP's show run config won't reveal the wlan-vlan mappings for security reasons.

Are there any configuartion changes that can be made to limit a HREAP/Flexconnect LAPs configuarion availability before it must be re-associated to a WLC?

//when the hreap ap moves to different/new wlc that doesn't have similar config like where it moved from wlc then it'll get default config from that new wlc.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards