11-16-2012 11:53 AM - edited 07-03-2021 11:03 PM
How long will a LAP configured for HREAP/Flexconnect mode stay in HREAP/Flexconnect mode.
And is this adjustable through CLI?
11-16-2012 12:02 PM
IT will stay in that mode until it is able to reach to the controller again.
What are you looking for inparticular
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
11-16-2012 01:17 PM
Security concerns around a LAP growing legs and walking away with my network configuration for locally switched WLANs.
Are there any configuartion changes that can be made to limit a HREAP/Flexconnect LAPs configuarion availability before it must be re-associated to a WLC?
11-16-2012 01:31 PM
How long will a LAP configured for HREAP/Flexconnect mode stay in HREAP/Flexconnect mode.
//Until you change the mode to something else on the wlc for that AP.
Security concerns around a LAP growing legs and walking away with my network configuration for locally switched WLANs.
//AP's show run config won't reveal the wlan-vlan mappings for security reasons.
Are there any configuartion changes that can be made to limit a HREAP/Flexconnect LAPs configuarion availability before it must be re-associated to a WLC?
//when the hreap ap moves to different/new wlc that doesn't have similar config like where it moved from wlc then it'll get default config from that new wlc.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide