Change your subnet mask on your PC to 255.255.255.0 and no need for a default gateway. Disable any firewall on your machine and then follow the previous instructions. You don't need to change the ip address on the AP and now you willo need to erase and reboot. So when you are in the CLI of the AP, issue a write erase and then reboot without saving. When the ap comes back, make sure there is no static address set. Then follow the proceedures above.
Help out other by using the rating system and marking answered questions as "Answered"
i was going via all the tools provided by our cloeagues and your tools as well but the main problem i cannot reach the interface of access point is something strange i never got is in my life
now the access hunging on the :
not sending discover request ap doesn't have an ip ..
Hello Team ,
Thanks a lot for the support
when i investigate it''s firewall behind blocking the transfer of the ios / actually the Chinese youtoob solution was help full a lot
see you in the coming scenario