I have setup MAC Filtering and everything is working great. From what I can see, MAC Filtering will only work for a WLAN that is configured for MAC Filtering and if the Profile Name field is set to that SSID or All WLANs. Also from what I'm seeing, the Interface and IP address fields make no difference when I modify them. I configured a device to be set to a different interface and the device never pulled an IP address from that interface, instead it just pull an IP from interface that the WLAN was configured for. What do I use the Interface and IP address fields for? I've tried a few different scenarios and they all seemed to come to the same result.
