04-05-2019 03:07 PM - edited 07-05-2021 10:12 AM
Does Mobility Express support client separation within a wireless vlan? I do not see any options for this in the ME configuration.
Solved! Go to Solution.
04-11-2019 01:54 AM
You can do it via CLI. First disable wlan and then
(WLC1) >config wlan peer-blocking ?
disable Disable peer-to-peer blocking on a WLAN.
drop Enable peer-to-peer blocking and set the action to 'Drop'.
forward-upstream Enable peer-to-peer blocking and set the action to 'Forward-Upstream'.
(WLC1) >config wlan peer-blocking drop ?
<WLAN id> Enter WLAN Identifier between 1 and 16.
(WLC1) >config wlan peer-blocking drop 12
Then enable wlan again
(WLC1) >config wlan enable 12
04-05-2019 04:24 PM
I am guessing your talking about peer to peer blocking on a Mobility express WLAN?
Its under the WLAN> VLAN & Firewall >Peer to Peer Block
The other thing with Mobility express is quite often the GUI does not have some of the normal WLC commands, but you can configure them via the CLI, so also try the CLI
04-07-2019 11:16 PM
?? Using code 8.5.140.0 .. no such option displayed....requires manual configuration of an ACL.....what code level are you using??
04-08-2019 12:02 AM
Please follow the advice of Sandeep, upgrade to 8.8 (MR2 is just released, so I guess that's the one to go for now):
04-11-2019 01:54 AM
You can do it via CLI. First disable wlan and then
(WLC1) >config wlan peer-blocking ?
disable Disable peer-to-peer blocking on a WLAN.
drop Enable peer-to-peer blocking and set the action to 'Drop'.
forward-upstream Enable peer-to-peer blocking and set the action to 'Forward-Upstream'.
(WLC1) >config wlan peer-blocking drop ?
<WLAN id> Enter WLAN Identifier between 1 and 16.
(WLC1) >config wlan peer-blocking drop 12
Then enable wlan again
(WLC1) >config wlan enable 12
04-11-2019 09:10 AM
wow...it worked...thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide