cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3128
Views
6
Helpful
2
Replies

Monitor the # of registered AP's on a 2504 via SNMP?

balley
Level 1
Level 1

Does anyone know the OID to determine the number of registered AP's on a WLC (specifically the AIR-CT2504).

I've got both of the Airespace MIBs and have browsed through them but I can't seem to find the correct location.  I can find a list of all of the AP's registered but our monitoring software doesn't have the ability to 'count' that index.  As such, I'm looking for a count/summation of the total number of registered AP's via SNMP.

Thanks!

Brian

2 Replies 2

balley
Level 1
Level 1

FYI for those reading later...I opened a TAC case and they confirmed that a count of the total APs that are registered is not published in SNMP.

Brian

It's an old post, but I had the same question. After some research I found a simple answer...

Use this OID: .1.3.6.1.4.1.9.9.618.1.8.4.0

If you want to also get the total number of Clients, use: .1.3.6.1.4.1.9.9.618.1.8.12.0

It does not work on 7.0 - it does on 7.6 and 8.0.

Best regards
Christoph

 

Review Cisco Networking products for a $25 gift card